Wednesday, March 26, 2014

Driving in the Rain

Spring has finally arrived! That means we'll also be welcoming spring showers. Many people don't often think of rain as a dangerous driving condition, but many accidents happen every year because drivers aren't taking the proper precautions when driving in the rain. Skidding and hydroplaning can easily be avoided as long as you are careful.

This list of tips from The Weather Channel will help you stay safe when driving in the rain.



1. You can prevent skids by driving slowly and carefully, especially on curves. Steer and brake with a light touch. When you need to stop or slow, do not brake hard or lock the wheels and risk a skid. Maintain mild pressure on the brake pedal. 
2. If you do find yourself in a skid, remain calm, ease your foot off the gas, and carefully steer in the direction you want the front of the car to go. You must be prepared to turn the steering wheel again and again until the front of the vehicle is traveling in a straight line. For cars without anti-lock brakes, avoid using your brakes. If your car has ABS, brake firmly as you steer into the skid. 
3. Avoid hydroplaning by keeping your tires inflated correctly. Maintain good tire tread. Don't put off replacing worn tires. Slow down when roads are wet, and stay away from puddles. Try to drive in the tire tracks left by the cars in front of you. 
4. If you find yourself hydroplaning, do not brake or turn suddenly. This could throw your car into a skid. Ease your foot off the gas until the car slows and you can feel the road again. If you need to brake, do it gently with light pumping actions. If your car has anti-lock brakes, then brake normally. The car's computer will automatically pump the brakes much more effectively than a person can do. 
5. A defensive driver adjusts his or her speed to the wet road conditions in time to avoid having to use any of these measures.

Click the link to read the full article from The Weather Channel: http://wxch.nl/1dnGKDQ

Wednesday, March 19, 2014

Spring Cleaning for Your Car

Spring is in the air! Pretty soon we'll be driving with the windows down and worrying about snow and ice will seem like a thing of the past. You want to make sure the gunk and grime of winter is gone from your car. Use these tips from Fox News in order to make your car spotless for springtime.


1. Wash the underbodyWintertime driving will coat the bottom of your car with salt, sand and other grime that can cause corrosion. Corrosion can lead to rust problems, which can make your car much harder to resell or even dangerous to drive. 
Spend a few extra dollars for the undercarriage power wash at the local car wash or spray the car's bottom with your own hose. If possible, use a car jack to raise the vehicle for a more thorough cleaning, advises Bill Kropelnicki, president and owner of Rambling River Repair in Farmington, Minn. There's no need to use soap or any other cleaner. 
While you're at it, open the hood and wipe down the engine with a soft mitt and soapy water. And remove all the leaves and debris that can find their way into the car, says Cliff Weathers, deputy autos editor for Consumer Reports. And remove any crusty white residue off the battery with a toothbrush, baking soda and water. The residue — caused by corrosion — can eventually prevent your car from starting. The cleaning also helps prepare the battery for the stress of warmer temperatures. 
2. Scrub inside and out
Salt and sand can damage the car's paint. Give your car a thorough cleaning and wax it with a paste or liquid wax, Weathers said. He cautions that sprays don't clean as well.
Scrub the bottoms of doors, which can get coated with grime, Kropelnicki says. He also urges car owners to clean the window channels, Also apply a silicone spray, which repels dirt and lubricates the surfaces so the windows will operate smoothly, he says. 
Use a steam cleaner — you can rent one for $20 at Home Depot — or apply a rug-cleaning spray to remove all the salt from the car's inside. Salt can break down some fabrics and cause rips or tears when feet grind against them. 
And don't forget to take bags of salt and ice scrapers out of the trunk. 
3. Replace wiper blades
Wiper blades get a workout during the winter months. Weathers advises changing them each spring and fall.
4. Check tires
Some garages recommend a wheel alignment — which can cost around $80 — or a tire rotation as part of your spring maintenance. Weathers doesn't think it's necessary as long as you're following the car's regular maintenance schedule and doing normal winter driving. 
Check your tire pressure. Cold weather can cause tires to be underinflated and the onset of warm weather can overinflate them. Also, visually inspect your tires to make sure they're wearing evenly and have plenty of tread for the rainy spring weather ahead. 
Driving on properly inflated tires can save you money. It can cost anywhere from $50 to $250 to replace a blown tire, depending on the kind of tire you need. 
5. Check your fluids
Winter weather can deplete some fluids — especially windshield wiper fluid — more quickly, so top them off yourself if they're too low. A service station will also do the job for $25 or so. You should change your oil around every 5,000 miles regardless of season, Weathers says. Brake and transmission fluids should be checked as well.

Click the link to read the full article from Fox News: http://tinyurl.com/oolyc9y

Wednesday, March 12, 2014

Sharing the Road With Trucks

Driving on the highway alongside and 18-wheeler can be intimidating. But sharing the road is something we have to do. Staying out of a trucker's blind spots and staying patient are just a few ways you can avoid getting into a dangerous situation with a truck on the road.

Make sure you're taking the proper precautions when driving alongside a truck with these tips from Edmunds.com.



1) Riding in a trucker's blind spots. Trucks have large blind spots to the right and rear of the vehicle. Smaller blind spots exist on the right front corner and mid-left side of the truck. The worst thing a driver can do is chug along in the trucker's blind spot, where he cannot be seen. If you're going to pass a truck, do it and get it over with. Don't sit alongside with the cruise control set 1 mph faster than the truck is traveling. 
2) Cut-offs. Don't try to sneak into a small gap in traffic ahead of a truck. Don't get in front of a truck and then brake to make a turn. Trucks take as much as three times the distance to stop as the average passenger car, and you're only risking your own life by cutting a truck off and then slowing down in front of it. 
3) Impatience while reversing. Motorists need to understand that it takes time and concentration to back a 48-foot trailer up without hitting anything. Sometimes a truck driver needs to make several attempts to reverse into tight quarters. Keep your cool and let the trucker do his or her job. 
4) Don't play policeman. Don't try to make a truck driver conform to a bureaucrat's idea of what is right and wrong on the highway. As an example, Taylor cited the way truck drivers handle hilly terrain on the highway. A fully loaded truck slows way down going up a hill. On the way down the other side of the hill, a fully loaded truck gathers speed quickly. Truckers like to use that speed to help the truck up the next hill. Do not sit in the passing lane going the speed limit. Let the truck driver pass, and let the Highway Patrol worry about citing the trucker for breaking the law. 
5) No assistance in lane changes or merges. It's not easy to get a 22-foot tractor and 48-foot trailer into traffic easily. If a trucker has his turn signal blinking, leave room for the truck to merge or change lanes. Indicate your willingness to allow the truck in by flashing your lights.

Click the link to read the full article from Edmunds.com: http://edmu.in/1dF9S6w

Wednesday, March 5, 2014

The Worst Things Your Auto Mechanic Can Tell You

Some car issues are easier fixes than others. But then there are those mechanical problems that every car-owner dreads, the fixes that make you consider buying a new vehicle because it might just be more worthwhile than paying the price for such an expensive repair.

Cars.com has compiled a list of the top 10 worst things your mechanic can tell you is wrong with your car. If you ever have one of these problems you might just want to consider stopping in to see us for your next vehicle.

Image from freedigitalphotos.net

1. Seized Engine Due to Lack of Oil
"The reason your engine stopped running is that it's now a melted mass of amalgamated metals. What used to be aluminum pistons, steel cylinder walls and an iron crankshaft is now a 900-pound garden sculpture. The Smithsonian wants to put it on display." 
Cost: $3,000 for a used engine, up to $10,000 for a remanufactured engine. 
The lowdown: A "seized" engine means that your lubrication failed (that is, you had insufficient oil or oil pressure), and the expensive moving parts of your engine scraped each other into a heated glob of useless scrap metal. Unfortunately, there's no way to fix a seized engine. Instead, the engine needs to be replaced with a used or remanufactured engine. What happens to your old engine? A recycler will finish the melting job, and the engine will be transformed into thousands of tiny Bic lighters.
2. Hydrolocked Engine
"That 4-foot-deep puddle that you tried to cross? You sucked some of it into your engine's cylinders." 
Cost: $3,000 to $10,000 
The lowdown: There are certain places water shouldn't be — like inside your iPhone, on your original Matisse watercolor or inside your engine's cylinders. Normally, your engine's cylinder contains air and droplets of fuel. The air is compressible, so when the piston squeezes everything, the pressure just goes up. Water is not compressible, so when the piston tries to squeeze the water, the piston loses. Then all the expensive parts that are attached to the piston get bent or broken. Just like your bank account. 
3. Overheated Engine 
"When you saw the paint on your hood was starting to blister, did that give you any kind of hint that you might have been overheating?" 
Cost: $100 to $10,000 
The lowdown: If you catch an engine overheating early enough and take action, you can get by cheaply. It could be a leaky hose, a stuck thermostat or a loose clamp.  If your car overheats badly, or frequently, you can do serious damage. The most common results of frequent or severe overheating are a blown head gasket, a cracked head or a cracked block. Those are, respectively, expensive, really expensive, and you may wind up saying, "I guess I won't be retiring for another year." 
4. Transmission Failure 
"Did you notice when you put your car in Drive, it doesn't move? We figured out why." 
Cost: $300 to $5,000 
The lowdown: The good news is that your engine is still running. The bad news? It's no longer connected to the wheels. Transmissions can fail for a number of reasons. These days, it's not uncommon for electronically controlled automatic transmissions to have problems related to software or solenoids. Those are not disasters and can be fixed for relatively little money. When the transmission's internal components start to disintegrate (like when your mechanic removes the transmission drain plug and chunks of metal fall out) due to old age, overheating the transmission or animalistic driving tendencies, it's time to tap the home-equity line of credit. 
5. Cracked Head, Blown Head Gasket or Cracked Block
"That stuff blowing out of your tailpipe isn't just water. It's antifreeze." 
Cost: $1,000 to $4,000 
The lowdown: There are a few places you should never see antifreeze: falling from the sky, in your cereal bowl or coming out your tailpipe. The engine's cooling system is a closed system, meaning that the coolant circulates from the engine's cooling passages to the radiator, the heater core and back again. It should never leave that loop. If it's somehow getting into the oil passages or the cylinders (and, from there, out the tailpipe) something has gone terribly wrong. Your head gasket has cracked, your head itself has cracked or, worst of all, your block has cracked. These problems are often the result of overheating (see No. 3). 
6. Broken Timing Belt
"Look in your glove box. If you open the shrink-wrapped booklet that says Owner's Manual, you'll see you should have changed your timing belt 20,000 miles ago." 
Cost: $1,500 to $3,500 
The lowdown: There are two kinds of engines: interference engines and non-interference engines. Or, as we refer to the interference engines in the trade, motor wreckers.
An interference engine is actually a more modern engine design, where the valves open wider and into the path of the upcoming piston. This lets the engine breathe better, giving it more power and better fuel efficiency. It all works fine as long as your timing works fine — when the valves are open, the piston is down, and when the piston comes up, the valves are closed and out of the way. If your timing belt breaks or jumps a notch on an interference engine, the piston smashes the valves, and you need a valve job ... at least. That's why it's crucial to change the timing belt at the recommended interval, before it gets anywhere near the point of breaking. 
On a non-interference engine, a broken timing belt will leave you stranded, but it won't crush your valves. You can ignore the timing belt change on one of those engines if you don't mind getting stuck. On an interference engine, you're rolling the dice on a large boat payment for your mechanic. 
7. Transmission Fluid in the Brake Fluid Reservoir 
"That was the brake fluid reservoir, to which you added transmission fluid." 
Cost: $800 to $2,000 
The lowdown: If you catch this mistake before you actually get back in the car and step on the brakes, and have the car towed to your mechanic, you may get by with just a new master cylinder. But once a petroleum-based product, like transmission fluid or motor oil, is pushed through the brake system, pretty much everything has to be replaced. The oils attack rubber seals, and everything except the metal brake lines has rubber seals. Once you've used the brakes and sent this stuff through the brake lines, grab your credit card and check your credit limit! 
8. Fried Computer  
"You hooked up the jumper cables backward." 
Cost: $1,500 to $100,000, in the event plastic surgery is required. 
The lowdown: In lots of cars, there's some type of protective circuitry in the event that you accidently reverse polarity when hooking up jumper cables. However, that's by no means true for all cars. If your car is one of the unlucky ones, you might be looking at having to buy a new computer for your car, and maybe a few new wiring harnesses, too. Even worse, you may incur so many confounding electrical problems that the best thing you could hope for is ... fire. Even if your car is OK, you might blow up one of the batteries in the two cars. If that happens, you might need to buy yourself a new face, too. 
9. Worn Clutch 

"That smell that's been following you around for miles? It's your clutch burning up." 
Cost: $1,000 to $2,500 
The lowdown: The operation of the clutch is based on friction. It's a tricky business to apply that friction slowly enough so that A) your engine doesn't stall and B) your passengers don't get whiplash. At the same time, you have to apply the friction quickly enough so you don't "sand down" the clutch and end up with no friction material left. When you continually let out the clutch too slowly, while giving the engine lots of gas, you're essentially wearing out the friction part of the clutch. Like a piece of sandpaper, a smooth clutch with no grabby surface can't do its job. If you're doing a bang-up job of it, you can actually start to smell the clutch burning as you wear it down. How quickly can you do this? We actually have a friend who did exactly this and destroyed a clutch in as little as 20 miles. No kidding! You know that $1,200 you saved by buying a manual transmission instead of an automatic? You're about to spend it on your first clutch replacement. 
10. Catastrophe at the Repair Shop
Cost: $0 if your mechanic has insurance; $25,000 if not. 
The lowdown: You know how you'll occasionally break a glass at home or drop a fork down the garbage disposal? Well, these kinds of little accidents happen. In the repair business, a tiny moment of carelessness can lead to something much more exciting, such as a car falling off the lift or catching fire. These are exciting moments for mechanics. And once they're over — and everyone is present, accounted for and still fully limbed — we feel a moment of euphoria to still be alive. 
Unfortunately, that's usually the moment we choose to call the customer and share this good news. "Good news! You're car fell off the lift, but nobody was underneath it!" For some reason, this isn't always received as good news. Fortunately, reputable repair shops have Bonehead Insurance for such calamities. You may be able to go out and buy that new Accord you've had your eye on. Remember: It's only a car. Cars can be replaced. People can't. At least that's what we keep telling our customers.

Click the link to read the full article from Cars.com: http://bit.ly/NuSEm1
Twitter Delicious Facebook Digg Stumbleupon Favorites More